High Corrosion Boiler Superheater Coils For Power Plant TP321
Superheater&Reheater, Custom Component For Boiler Superheater
Coil
A superheater is a component that heats saturated steam in an
industrial boiler, turning it into superheated steam. Our
superheater guarantees that the superheated steam temperature will
fluctuate to within an allowable range (normally varies from 540°C to 500°C)when the boiler is over loaded.
Super heater types:
1. Radiant super heater: it is the earliest type of super heater
and it is located above or behind banks of water tubes to
protection them from direct flam or fire.
Parameters that increases the convection
a. Increasing the fuel-and air flow (combustion gas flow)
b. Increasing the mass flow rate of the steam
Radiation is mainly dependent on the flam temperature. as the steam
flow rate increases the exit temperature become lower.
Radiant super heater
They are placed exposed to the heat source whcih requires the
improvement of metal temperatures.
Radiant and convetive super heaters and reheaters are used for high
temperature steam.
The accessory of high temperature radiant steam super heater in
boiler
It is made up of snake-like tubes (carbon steel, alloy steel or
heat-resistant steel, etc.) and collection boxes and other
supporting material. Tubes generally have φ32, φ38, φ42 or other
types of specifications, according to user's needs separately.
Reheaters
They are the sane as the super heaters but as their exit
temperature is a little bit less than super heaters and their
pressure is 20% -25% less than the super heater, they can stand
less quality material alloys.
Application:
Steam super heater is consisted of dense tube coils and is placed
in the flue under the tempearture 450ºC-1000ºC.
For power plant boiler capacity over 10Mpa, platen and coiled
superheater are usually adopted.
Details
| 1 | Material composition | Carbon steel, alloy steel or heat-resistant steel, collection boxes
and other supporting material. Tubes are customized types of
specifications. |
| 2 | Design pattern | Vertical or horizontal layout. |
| 3 | Advantages | Beautiful appearance, size, accuracy, first-class bending and
welding technology, first-class detection equipment. |
Design structure
1. heating saturated steam, temperature up to 900 degree C.
2. high efficiency, >90%.
3. high speed heating.
4. design with stainless steel.
5. long design service life, 15 years.
Send us required technical data, such as steam capacity, presure,
required temperature etc. We will design accordingly.
HD Boiler offers a best in class facility
For over 30years, Hua Dong Boiler has been consistently innovating
and improving our boiler superheaters and reheaters.The
improvements in bending,welding and design ensure our products meet
both Euorpean and American standards, ensuring a relabile
performance.
