Sign In | Join Free | My himfr.com
Home > Flue Gas Cooler >

Pro - Environment Customized Flue Gas Cooler CE ROHS CCC ISO9001 UL

Zhangjiagang HuaDong Boiler Co., Ltd.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap Pro - Environment Customized Flue Gas Cooler CE ROHS CCC ISO9001 UL from wholesalers
     
    Buy cheap Pro - Environment Customized Flue Gas Cooler CE ROHS CCC ISO9001 UL from wholesalers
    • Buy cheap Pro - Environment Customized Flue Gas Cooler CE ROHS CCC ISO9001 UL from wholesalers
    • Buy cheap Pro - Environment Customized Flue Gas Cooler CE ROHS CCC ISO9001 UL from wholesalers
    • Buy cheap Pro - Environment Customized Flue Gas Cooler CE ROHS CCC ISO9001 UL from wholesalers

    Pro - Environment Customized Flue Gas Cooler CE ROHS CCC ISO9001 UL

    Ask Lasest Price
    Brand Name : HD Boiler
    Model Number : LSS
    Certification : CE,ROHS,CCC,ISO9001,UL
    • Product Details
    • Company Profile

    Pro - Environment Customized Flue Gas Cooler CE ROHS CCC ISO9001 UL

    Pro-environment Long Lifetime Flue Gas Cooler for Drying or Cooling usage for Various Equipments


    General Introduction of Product

    • Flue gas coolers are special heat recovery units where sensible heat contained in usually dirty flue gases is used to produce and superheat steam or to preheat process oil streams for energy conservation purposes. The heat recovery section is composed either of horizontal or vertical bare tubes for forced or natural circulation of the steam, respectively.
    • Working principle of a flue-gases cooler is the same as in the above-described equipment, but the aim in this case is to cool a primary fluid, not to get a thermal profit by heating a secondary fluid.
    • These equipment are usually installed as the previous step to a flue-gases cleaning, to avoid the gases from reaching the cleaning systems at too high temperatures. This means an alternative to the dilution with air, which would imply an over-sizing of the mentioned systems.

    Detailed Information


    1
    Before designing this kind of equipment, it is necessary to know the nature of the gases to be cooled and their dust content.
    2
    The purpose of all that is to design an equipment free of important fouling which would force to make cleaning works more frequently than wanted.
    3
    We must have in mind as well the availability to detach the dust from the gaseous stream containing it in all those areas where there is a bend or some enlarging in the pass section, which forces to include in the design some systems for dust collection and removal, to allow the correct heat exchange.

    Efficiency


    (a)Flue gas condensation may cause the heat recovered to exceed the Lower Heating Value of the input fuel, and thus an efficiency greater than 100%.
    (b)Since historically most combustion processes have not condensed the fuel, usual efficiency calculations assume the combustion products are not condensed.
    (c)This assumption is implicit when basing calculations on the Lower Heating Value.

    (d)A more rigorous approach would be to base efficiency calculations on the Higher Heating Value, which typically results in efficiencies less than 100%.
    (e)Should the flue gases be cooled below 25 °C (77 °F), even efficiencies based on the Higher Heating Value may exceed 100%, since typical heating value definitions assume that all heat is released when combustion products are cooled to somewhere between 15.56 °C (60.01 °F) and 25 °C (77 °F).


    Conclusion


    To sum up, the following items have to be taken into account when designing a flue-gases cooler:

    1Kind of fluid.
    2Dust content.
    3Maintenance and cleaning works.
    4Connection of the equipment with the rest of the plant.
    5Depending on the above mentioned factors, different technical solutions may be applied which will go through the adoption of an arrangement
    6Vertical/Horizontal.
    7Modular (with only one or many fans).

    Manufacturing

    Flue Gas Heat Recovery Module With Sonic Or Steam Blower Required Standard Of Exhaust Air Emission


    Company Profile

    • Locates in Dong Lai Industrial Park
    • 150km expressway to Shanghai
    • 60km state road to Suzhou or Wuxi
    • Area 65000m2 (building area 55000m2)
    • Over 700 staff
    • Production of 33,000 tons in 2009
    • Complete 15 export projects (to US, India, Turkey, etc.) in 2009
    • Top 100 Enterprises of Zhangjiagang City
    Quality Pro - Environment Customized Flue Gas Cooler CE ROHS CCC ISO9001 UL for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Zhangjiagang HuaDong Boiler Co., Ltd.
    *Subject:
    *Message:
    Characters Remaining: (0/3000)